hello 

i'm gonna try and  make it short... i have really good aim in every game like csgo r6 blacksquad , start the bo4 --------> super bad aim  

it is not really me either since there seems to be extreme smoothing or vsync , so bad that stopping at a fine point is simply impossible 

 

i can send you clips of me playing other games if you like 

Edited October 17, 20187 yr by ZSfGuBcu

turn down the ads sens. its set to 75% at the start. thats way to much for alot of players. in other cods it was like 50-60

On 10/20/2018 at 5:59 AM, JakobseNSebastiaN said:

turn down the ads sens. its set to 75% at the start. thats way to much for alot of players. in other cods it was like 50-60

hi

there is no option for ads sensitivity 

there is 1 sensitivity with relative or legacy setting and there is a monitor match  

2 hours ago, Guest ZSfGuBcu said:

hi

there is no option for ads sensitivity 

there is 1 sensitivity with relative or legacy setting and there is a monitor match  

I think %75 coefficient same as %75 ADS sens

5 hours ago, Guest ZSfGuBcu said:

hi

there is no option for ads sensitivity 

there is 1 sensitivity with relative or legacy setting and there is a monitor match  

There's a ads sensitivity multiplier in the config file.

mouse_ads_yaw_ads_multiplier = "1" // 0 to 30

mouse_ads_pitch_ads_multiplier = "1" // 0 to 30

3 hours ago, Pyroxia said:

I think %75 coefficient same as %75 ADS sens

75% means it distance matches to the angle at 75% distance from center to monitor edge. If you have 1 ads multiplier, 75% relative match, then hipfire and all aims will require the same mouse distance to move purely horizontal to whatever reference point is at the 75% mark. Check the monitor distance match video to see what its suppose to do. It's the ads multipliers above that drop the sensitivity by a flat amount.

 

On 10/21/2018 at 1:59 AM, JakobseNSebastiaN said:

turn down the ads sens. its set to 75% at the start. thats way to much for alot of players. in other cods it was like 50-60

Past cods scaled proportionately with the change in fov, which is legacy or 0% relative. If you played a past cod at 90 (4:3) fov, then aiming with smg dropped the sensitivity value by 52.0567%, and ar was 46.6308%, both scaling proportionately with the change in FOV. Whenever you aimed down sights with an SMG, everything scaled by 100/52.0567= 2.144507. Since the rendered frame is 2.144507x zoomed in, enemies and geometry looked 2.144507x larger on the screen, enemies moved 2.144507x faster across the screen, etc. The sensitivity scaled by 1/2.144507 to keep the input sensitivity unchanged. The distance to rotate angle per angle changes by the zoom factor though, so the distance to rotate 360 degrees will be 2.144507x larger. If it kept the 360 degree distance, then the input sensitivity would actually not be identical, but amplified. Same with any relative distance setting above 0%, they are amplifications in sensitivity. Use legacy or 0 relative if you want it like every other cod.

Edited October 23, 20187 yr by Drimzi