I tried using the calculator and input everything correctly and the only thing that worked was the hip fire and the other sensitivity didn’t give me a 1:1 sensitivity. Can anyone help me?

What are you converting from?

PS, there is no such thing as true 1:1 sensitivity unless the FOV is also identical

From Csgo, my sensitivity is 2.357457 on Csgo and on Mw it gave me 7.86 I think, but the Ads doesn’t feel right. The way I checked it was when I Ads if I complete a full 360 put it only reaches around halfway. 

1:1 rotation distance is not 1:1 sensitivity. Anyway the game scales the sensitivity using Monitor Distance Match. You will have to pick Legacy (Monitor Distance 0%), or Relative (Coefficient * 100 = Monitor Distance Vertical %). After that, you will have to use the ADS Sensitivity (Low Zoom) multiplier to cancel out the Legacy/Relative system for a specific weapon.

2 minutes ago, baggyprince said:

From Csgo, my sensitivity is 2.357457 on Csgo and on Mw it gave me 7.86 I think, but the Ads doesn’t feel right. The way I checked it was when I Ads if I complete a full 360 put it only reaches around halfway. 

You generally don't want the same 360 distance for ADS and scopes, as that makes them extremely sensitive and aiming very difficult. That's why there's other matching methods available based on FOV. You can switch the conversion setup to match 360 distance for ADS (and scopes), but for many games this is not even possible to achieve.

Thank you so much you’ve been really helpful.

14 minutes ago, Drimzi said:

1:1 rotation distance is not 1:1 sensitivity. Anyway the game scales the sensitivity using Monitor Distance Match. You will have to pick Legacy (Monitor Distance 0%), or Relative (Coefficient * 100 = Monitor Distance Vertical %). After that, you will have to use the ADS Sensitivity (Low Zoom) multiplier to cancel out the Legacy/Relative system for a specific weapon.

So what do you mean by a specific weapon?  I’m using legacy and monitor distance coefficient is at 0 but I don’t understand what you meant by canceling out?

9 minutes ago, baggyprince said:

So what do you mean by a specific weapon?  I’m using legacy and monitor distance coefficient is at 0 but I don’t understand what you meant by canceling out?

If you are using legacy, then the turn amount scales by the zoom. If you aim with a weapon, and it performed a 2x zoom, essentially doing sensitivity / 2, you would need to set the ads sensitivity multiplier to 2. sensitivity / 2 * 2 = sensitivity. It cancels out. All the other weapons will still be off though, as a 3x zoom would end up with sensitivity / 3 * 2 = sensitivity / 1.5.

Just note that these numbers are hypothetical and for demonstration purposes.

Edited October 26, 20196 yr by Drimzi

8 minutes ago, Drimzi said:

If you are using legacy, then the turn amount scales by the zoom. If you aim with a weapon, and it performed a 2x zoom, essentially doing sensitivity / 2, you would need to set the ads sensitivity multiplier to 2. sensitivity / 2 * 2 = sensitivity. It cancels out. All the other weapons will still be off though, as a 3x zoom would end up with sensitivity / 3 * 2 = sensitivity / 1.5.

Just note that these numbers are hypothetical and for demonstration purposes.

Oh alright I understand, thanks 

54 minutes ago, DPI Wizard said:

You generally don't want the same 360 distance for ADS and scopes, as that makes them extremely sensitive and aiming very difficult. That's why there's other matching methods available based on FOV. You can switch the conversion setup to match 360 distance for ADS (and scopes), but for many games this is not even possible to achieve.

Another quick question so for the rifleman scope and for the marksman scope it’s telling me to input 1.18? Should I just leave it at the default of 1v