Jump to content

Twilight Town: A Cyberpunk FPS

Just added.
Read more...

Contain

See the game notes for instructions on how to disable smoothing.
Read more...

Vomitoreum

Just added.
Read more...

Double Action: Boogaloo

Just added.
Read more...

FOUNDRY

Just added!
Read more...

I am a newbie. Can tell me how to use the tool?


Recommended Posts

Hello everyone, I tried to read the explanation of the two rules, but to tell the truth, I can't see clearly what I said. So if I assume that the v2 rule is perfect, I also believe it, at least for now.
So for example, I need to figure out how fast the csgo awp is twice as fast as the v2 rule:

QQ20180417-113556.thumb.png.2bc449c82d489a7140a66c50686db3c7.png

So I just need to fill ‘zoom_sensitivity_ratio_mouse 0.987533’ into the game. I can get the speed of the perfect v2 rule at awp 1x?

 

For another example, if I sync awp2x of csgo to another game (BS):

QQ20180417-114513.thumb.png.eb2a02ad30474860b330a8cbb005912b.png

Because csgo's sniper magnifies the distance one time is not very large. The BS game is very far from sniping and zooming. I don't know how to describe it. It's that the zoom factor of sniping is not the same.

So is my choice correct? There is also a problem. If Monitor Distance is selected, what does ‘Match At’ mean?

Link to comment

Try not to change the input. Keep it as CSGO hipfire with 1.3 sensitivity. Only change the output. The output will always get the correct value if you do this.

If you match to Zoom 1 and then convert from Zoom 2 using the sensitivity value intended for Zoom 1, then you are converted from an incorrect input. Since the game has many different zooms fovs, and you can only offset the scaling so that it is correct for one zoom state, all other zoom states are going to have an incorrect sensitivity. Don't use these as an input.

 

'Match at' defines a point a certain distance away from the crosshair where the mouse distance required to rotate to that point is identical at all FOVs. If you set 100%, it will match at the edge of your screen, and the mouse distance required to rotate to the edge of the screen will be the same for all games and scopes.

 

My recommendation is to either use Viewspeed v2, Monitor Match with 0%, or Monitor Match set to match at the top/bottom of your screen. The 'match at' percent for this can be found by putting this into a calculator:

resolution height / resolution width * 100

Example: 1080 / 1920 * 100 = 'Match at: 56.25 %'

 

Try each one and see what feels most natural to you, as it is different for everybody.

Edited by Drimzi
Link to comment

用一个合适的腰射灵敏度去v2匹配其他所有游戏的zoom灵敏度就行 -- 保留输入的1.3*800,选择要转换的游戏,就像Drimzi说的

顺便CSGO里,用v2无法统一AWP的1x的zoom sens和2x的zoom sens... 最佳选择还是75% MM(个人浅见)

Link to comment
14 小时前, CopperCn说:

用一个合适的腰射灵敏度去v2匹配其他所有游戏的zoom灵敏度就行 -- 保留输入的1.3*800,选择要转换的游戏,就像Drimzi说的

顺便CSGO里,用v2无法统一AWP的1x的zoom sens和2x的zoom sens... 最佳选择还是75% MM(个人浅见)

wow!谢谢大佬!不过v2好想不用选择match at。

Edited by Steam
Link to comment
On 2018/4/19 at 1:28 PM, CopperCn said:

对的,v2大概是71% MM,其实因为CSGO开镜默认是75% MM,这个75% MM就是现在算法的始祖

v2给的结果和75%差不多,v1才是70%左右。csgo和战地都是75%。Drimiz建议题主选择0%match 或者你的monitor 算出来后得match 比如16:9 就是56.25%, 或者v2。

题主最好一个个试下,找下感觉。v1就算了,基本没用。

 

Link to comment
14 minutes ago, cchhqq said:

v2给的结果和75%差不多,v1才是70%左右。csgo和战地都是75%。Drimiz建议题主选择0%match 或者你的monitor 算出来后得match 比如16:9 就是56.25%, 或者v2。

题主最好一个个试下,找下感觉。v1就算了,基本没用。

 

v1是69.5%,v2是71%,MM主流是75%就是根据4:3 aspect ratio算的(手动AC娘点赞)

Edited by CopperCn
Link to comment
12 minutes ago, CopperCn said:

v1是69.5%,v2是71%,MM主流是75%就是根据4:3 aspect ratio算的

比如说bf1 15% 400 dpi, 69.5% 转换到ow就是9.15. 你用75%和v2都会给9.16. 总不能说给出结果更不一样的69.5%反而更接近v2把?之前我很久以前已经问过monitor distance 75%和v2的问题了。wizard和drimiz都说了是75%和v2给出来的结果一样。

不信的话你可以自己再测试一下结果。虽然结果总的上差不多,但69.5总会少0.01,而75会和v2给的结果一摸一样。

我倒是很好奇你说的v2 71,v1 69.5%的结论是哪里来的,从来没再论坛里见到过这种说法。。。

Link to comment
16 minutes ago, cchhqq said:

比如说bf1 15% 400 dpi, 69.5% 转换到ow就是9.15. 你用75%和v2都会给9.16. 总不能说给出结果更不一样的69.5%反而更接近v2把?之前我很久以前已经问过monitor distance 75%和v2的问题了。wizard和drimiz都说了是75%和v2给出来的结果一样。

不信的话你可以自己再测试一下结果。虽然结果总的上差不多,但69.5总会少0.01,而75会和v2给的结果一摸一样。

我倒是很好奇你说的v2 71,v1 69.5%的结论是哪里来的,从来没再论坛里见到过这种说法。。。

我也看到过他们的说法,但实际上viewspeed究竟是多少MM很大程度上决定于输入和输出的游戏的FOV差距。我说的69.5/71%是用viewspeed v1/v2从2d(windows桌面,osu)转换到90HOR+ FOV的游戏(CS:GO,QUAKE LIVE)时的MM(误差0.1%左右)。总的来说还是在75% MM左右浮动。愚见,我还要继续啃一啃drimzi的工作。

Edited by CopperCn
Link to comment
1 minute ago, CopperCn said:

我也看到过他们的说法,但实际上viewspeed究竟是多少MM很大程度上决定于输入和输出的游戏的FOV差距。我说的69.5/71%是用viewspeed v1/v2从2d(windows桌面,osu)转换到90HOR+ FOV的游戏(CS:GO,QUAKE LIVE)时的MM(误差0.1%左右)。愚见,我还要继续啃一啃drimzi的工作。

按那种输出方法确实是你给出的值。但2d转3d现存的方法都有挺大的distortion。并没有3d到3d那么准确(也不是说3d到3d就完全准确了)题主并不是同步桌面灵敏度的玩家,所以按照75%约等于v2的方法对他来说比较准确,也对大部分人来说比较有用。

2d到3d我感觉更多的是提供一个更精确的转换结果。比如说2d到csgo,2d到ow,2d到bf,这几个结果会更加同步(more precise match)。如果从csgo 一个灵敏度转到所有其他游戏,会比这个稍微不准一点。当然,这是drimiz说会更准确。我是觉得差别不大。

还有我觉得就是2d到3d是新手fps一个比较好的上手方式。也能让在aim400kg,aimbooster里面的水平更多的发挥到3d游戏中。

drimiz这个人我觉得还是很有点东西的,还有拿个potato啥的。我把他们两个的帖子基本都翻了一遍了。不过他们的观点感觉还是有些地方不同的。他们关于0%, 100% match的看法差不多。但drimiz推崇56.25%和v2。最开始他推的v2,这个好像还是他自己设计的算法,后面推56.25%,现在两个都推了。不过不知道他现在用的啥。他把自己设置介绍取消了。

potato觉得中间75%什么的都是0%和100的结合版。(我觉得这个很有道理)他觉得iewspeed1和2就是错的,56.25%也只是一个arbitrary值,显示器比列变了,就不同了。之前还一个大神也是觉得viewspeed就是错的。这两个人都是推0%match的。

我还是比较偏向drimiz的看法,他推的两个我自己游戏里感觉同步比较准确点。但0%match在玩高倍镜时会更舒服,按zoom scale确实很有感觉。

Link to comment
5 minutes ago, cchhqq said:

按那种输出方法确实是你给出的值。但2d转3d现存的方法都有挺大的distortion。并没有3d到3d那么准确(也不是说3d到3d就完全准确了)题主并不是同步桌面灵敏度的玩家,所以按照75%约等于v2的方法对他来说比较准确,也对大部分人来说比较有用。

2d到3d我感觉更多的是提供一个更精确的转换结果。比如说2d到csgo,2d到ow,2d到bf,这几个结果会更加同步(more precise match)。如果从csgo 一个灵敏度转到所有其他游戏,会比这个稍微不准一点。当然,这是drimiz说会更准确。我是觉得差别不大。

还有我觉得就是2d到3d是新手fps一个比较好的上手方式。也能让在aim400kg,aimbooster里面的水平更多的发挥到3d游戏中。

drimiz这个人我觉得还是很有点东西的,还有拿个potato啥的。我把他们两个的帖子基本都翻了一遍了。不过他们的观点感觉还是有些地方不同的。他们关于0%, 100% match的看法差不多。但drimiz推崇56.25%和v2。最开始他推的v2,这个好像还是他自己设计的算法,后面推56.25%,现在两个都推了。不过不知道他现在用的啥。他把自己设置介绍取消了。

potato觉得中间75%什么的都是0%和100的结合版。(我觉得这个很有道理)他觉得iewspeed1和2就是错的,56.25%也只是一个arbitrary值,显示器比列变了,就不同了。之前还一个大神也是觉得viewspeed就是错的。这两个人都是推0%match的。

我还是比较偏向drimiz的看法,他推的两个我自己游戏里感觉同步比较准确点。但0%match在玩高倍镜时会更舒服,按zoom scale确实很有感觉。

我和Josh(aka potato psoas)一个观点,我两个月前完全抛弃了viewspeed专心75% MM了,原因就是CSGO BF QUAKE都是默认在16:9时75% MM(4:3时 100% MM)。0% MM我觉得很好,但是会让你开镜灵敏度太慢...

Edited by CopperCn
Link to comment
3 minutes ago, CopperCn said:

我两个月前完全抛弃了viewspeed专心75% MM了,原因就是CSGO BF QUAKE都是默认75% MM。

哈哈,我也用mm75,也是因为我一直玩csgo和bf。所以习惯了这种感觉。不想换了。

56.25%确实我也觉得可能合更多人胃口。在玩ow时,感觉zoom 43确实比45更舒服。但我还是用的75。。

感觉现在论坛里好多人用56.25%了。potato疯狂安利0%,感觉用的人还是没太多。毕竟0%还是有点慢太多了。2d到3d用0%又超级快,都28cm了,这论坛发帖的感觉能接受这么高sens的不太多。

Edited by cchhqq
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...