Updated with hipfire and zoomed sensitivity for the release version.
Updated with hipfire and zoomed sensitivity for the release version. Edited November 17, 2017 by DPI Wizard
Nameless 7 Posted February 4, 2019 On 10/31/2018 at 1:14 AM, noaimBoii said: Hi DPI Wizard. I want to use exactly 103 horizontal FOV with SWBF2, but the config file doesn't use traditional angle units for its FOV. It seems like the file uses vertical degrees in radians but with an arbitrary multiplier of. 1.041741446 The vertical degree radians that I would need would be 1.231029591* 1.041741446 = 1.282414546 Then I just enter 103 Hres in the calculator and convert 360/cm for the game. However I'm not sure if my FOV is correct. Can you please check for me? Sorry about this terrible formatting Would you lmk when u get the answer? Link to comment
Nameless 7 Posted February 4, 2019 (edited) I converted Overwatch sensitivity to Battlefront 2 mouse sensitivity and zoomed sensitivity. To double check the result i converted the result for battlefront 2 to Battlefront 2 Zoom sens, see pic 2 bellow for reference. Why do i get a different result? How can i get 8 at 400 dpi from Overwatch to Battlefront 2 mouse sensitivity and zoomed sensitivity 61 fov at same dpi? For now i'm using the result from pic 1 for battlefront 2 all sensitivity (soldier and Zoom). For now my final result is OW:8 at 400 dpi = 0.033013 Sensitivity, 1.099044 Zoomed (Sniper DLT). I'm i doing this wrong again? Edited February 4, 2019 by Nameless Link to comment
Nameless 7 Posted February 4, 2019 (edited) What is the exact = sensitivity, and Zoomed sensitivity for 8 Overwatch at 400 dpi to battlefront 2? Is this result correct: 0.033013 Sensitivity 1.099044 Zoomed (DLT)? because when i do overwatch to all i get a different result , see 2.png as reference. Any comment? Edited February 4, 2019 by Nameless Link to comment
Groen28 1 Posted April 28, 2019 Just wondering if third person option will be made available just like the PUBG calculator since this game also has both (1st and 3rd person) option. Also is the default calculation 1st or 3rd person? Link to comment
Wizard DPI Wizard 3,867 Posted April 28, 2019 Wizard 1 minute ago, Groen28 said: Just wondering if third person option will be made available just like the PUBG calculator since this game also has both (1st and 3rd person) option. Also is the default calculation 1st or 3rd person? It's for 1st person. I need to check if it's the case, but if the FOV is the same for 1st and 3rd person the calculations will be the same. So no need for a separate entry in that case. PUBG has dedicated 1st and 3rd person options because FOV is locked in 3rd but not in 1st. Link to comment
Groen28 1 Posted April 28, 2019 1 hour ago, DPI Wizard said: It's for 1st person. I need to check if it's the case, but if the FOV is the same for 1st and 3rd person the calculations will be the same. So no need for a separate entry in that case. PUBG has dedicated 1st and 3rd person options because FOV is locked in 3rd but not in 1st. I am asking because I only play this game in third person and I believe majority of players do as well, I might be wrong. If there's a difference, I would love a seperate option for 3rd person, thanks in advance. Link to comment
Wizard DPI Wizard 3,867 Posted April 28, 2019 Wizard 15 minutes ago, Groen28 said: I am asking because I only play this game in third person and I believe majority of players do as well, I might be wrong. If there's a difference, I would love a seperate option for 3rd person, thanks in advance. Just checked now, and the FOV is the same for 1st and 3rd person so there is no need for a dedicated 3rd person calculator. This game still has horrible acceleration/smoothing issues though. Quite a feat considering it's based on one of the best game engines available... Link to comment
Groen28 1 Posted April 28, 2019 Just now, DPI Wizard said: Just checked now, and the FOV is the same for 1st and 3rd person so there is no need for a dedicated 3rd person calculator. This game still has horrible acceleration/smoothing issues though. Quite a feat considering it's based on one of the best game engines available... Thank you for double checking. I assume the vehicle calculation isn't in there still because of the acceleration/smoothing issues, if that's the case, that's really unfortunate, back to using gamepad for it. Link to comment
Wizard DPI Wizard 3,867 Posted April 28, 2019 Wizard 2 minutes ago, Groen28 said: I assume the vehicle calculation isn't in there still because of the acceleration/smoothing issues, if that's the case, that's really unfortunate Correct, since it's based on Frostbite 3 I was able to deduce the hipfire and aim sensitivity since it's related to (but not the same as) Battlefield games. Vehicles are generally a lot trickier since they usually have a built in negative acceleration or max turn speed etc, so with the added smoothing and acceleration already present it makes it really hard to analyze. Groen28 1 Link to comment
jabbothehut 11 Posted June 27, 2019 @DPI Wizard is there still mouse accel/smoothing for infantry? Kind of putting me off getting this game atm. Link to comment
Morthuul 1 Posted July 14, 2019 Hi, I can´t modify my config file because it seems encoded or I dont have the right editor. Any ideas, how I can change this? Link to comment
Wizard DPI Wizard 3,867 Posted July 14, 2019 Wizard 1 minute ago, Morthuul said: Hi, I can´t modify my config file because it seems encoded or I dont have the right editor. Any ideas, how I can change this? You are probably opening the wrong file called "ProfileOptions". The correct file is "ProfileOptions_profile_synced". Morthuul 1 Link to comment
Lizardizzle 1 Posted September 7, 2019 Are the GstRender.FieldOfView #.# and GstRender.FieldOfView_StoredData #.# commands within ProfileOptions_profile compatible with the calculator? The in-game slider is fairly inaccurate to use. Link to comment
3dsfinn 1 Posted July 4, 2020 You can reduce the mouse acceleration from the game by increasing DPI. Can someone confirm this? Link to comment
starrcraft16 0 Posted August 1, 2020 (edited) Why does star wars battlefront 2 only go up to 85% zoomed for multiplier 1 in game in the calculator? I have mine set at 100% in game and when i enter 100% in the calculator it says the maximum is 85%? Edited August 1, 2020 by starrcraft16 Link to comment
starrcraft16 0 Posted August 1, 2020 would appreciate any help you can give dpi wizard as this game is pretty much my only baseline to calculate my sensitivity for other games as its like the only game im good at Link to comment
Wizard DPI Wizard 3,867 Posted August 1, 2020 Wizard 14 hours ago, starrcraft16 said: Why does star wars battlefront 2 only go up to 85% zoomed for multiplier 1 in game in the calculator? I have mine set at 100% in game and when i enter 100% in the calculator it says the maximum is 85%? It used to be limited for some reason, but it works properly now so I've updated the game Link to comment
LordBane 0 Posted September 14, 2020 Hi DPI wizard im having trouble getting my apex legends ADS values to match over to battlefront 2 , Battlefront 2s ADS just feels all over the shop and not based on like a 1.1 with your hipfire based on your fov My apex settings are 100 FOV ( so 83-84 BF 2 FOV ) 2 ingame and 600 DPI and ADS is set to 1.0 its fine when i play games from EA that have uniform soldier aim Link to comment
j2daf6891 0 Posted November 20, 2020 Amazing work first of all, DPI Wizard! So glad that there may finally be an answer to my BF 2 mouse frustrations. My apology if I missed this in your instruction, but where can I enter the in-game slider sensitivity % in your calculator? Basically if I use the number from the text file to find my ideal sensitivity to replace that, should I just leave the in-game slider default (50%)? Also, was curious to try the "turn down in-game sensitivity and turn up dpi setting" method someone suggested for the mouse acceleration issue fix. So wondering if I turn that down to maybe 1%, how can I convert that to the appropriate dpi to get the same cd/360? Thanks! Link to comment
Wizard DPI Wizard 3,867 Posted November 20, 2020 Wizard 4 minutes ago, j2daf6891 said: My apology if I missed this in your instruction, but where can I enter the in-game slider sensitivity % in your calculator? Basically if I use the number from the text file to find my ideal sensitivity to replace that, should I just leave the in-game slider default (50%)? The in-game value is directly linked to the config file value, so it's enough to just set it in the config file. 6 minutes ago, j2daf6891 said: Also, was curious to try the "turn down in-game sensitivity and turn up dpi setting" method someone suggested for the mouse acceleration issue fix. So wondering if I turn that down to maybe 1%, how can I convert that to the appropriate dpi to get the same cd/360? Use the calculator like this to convert from old to new DPI. The values in this link are just examples, use your own values https://www.mouse-sensitivity.com/?share=bf4f443187f75b6e51e6c058144c948e Link to comment
j2daf6891 0 Posted November 20, 2020 2 minutes ago, DPI Wizard said: The in-game value is directly linked to the config file value, so it's enough to just set it in the config file. Use the calculator like this to convert from old to new DPI. The values in this link are just examples, use your own values https://www.mouse-sensitivity.com/?share=bf4f443187f75b6e51e6c058144c948e Thanks! will give it a try when I get home. "The in-game value is directly linked to the config file value, so it's enough to just set it in the config file." So if I make changes in the config file, the in game % would also change, and vice versa right? Link to comment
Wizard DPI Wizard 3,867 Posted November 20, 2020 Wizard Just now, j2daf6891 said: So if I make changes in the config file, the in game % would also change, and vice versa right? Correct The config file has a much wider range though, so in-game might just display 0% if it's below the minimum in-game value. It will still be applied as in the config file if this happens. j2daf6891 1 Link to comment
j2daf6891 0 Posted November 21, 2020 just tried out a config of about 0.004 sensitivity with 4000dpi. Felt good but navigating the game menu after a game feels like I am on drugs lol. On the topic of matching my hipfire with ADS/Scope. If I didn't come from Battlefield, would you still think 75% would be a good number to start with? And I am assuming Scale is to be left at 100% right? Link to comment
Wizard DPI Wizard 3,867 Posted November 21, 2020 Wizard 4 hours ago, j2daf6891 said: just tried out a config of about 0.004 sensitivity with 4000dpi. Felt good but navigating the game menu after a game feels like I am on drugs lol. Yeah, that's the biggest drawback of using very high DPI. Some games do have a separate cursor sensitivity, but most do not. 4 hours ago, j2daf6891 said: On the topic of matching my hipfire with ADS/Scope. If I didn't come from Battlefield, would you still think 75% would be a good number to start with? And I am assuming Scale is to be left at 100% right? Scale is to be left at 100% if you want all scopes to have the same relative scaling yes. 0% coefficient is typically the best place to start, and try higher values if it feels too slow. Link to comment
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now