Added with a limited number of aims, more will be added later!
Wizard DPI Wizard 3,891 Posted November 21, 2020 Wizard 14 minutes ago, Angelofthefallen said: On modern warfare I used 7.33 hipfire sensitivity and with 1 ads sensitivity at 90 fov with independent. I'm also confused and not sure if I should change it to or independent. Keep it independent. Angelofthefallen 1 Link to comment
Angelofthefallen 3 Posted November 21, 2020 Thank you! and I need to use 115 fov? I can't use 90 fov? Link to comment
Wizard DPI Wizard 3,891 Posted November 21, 2020 Wizard 1 hour ago, Angelofthefallen said: Thank you! and I need to use 115 fov? I can't use 90 fov? Use the same FOV as in MW. Link to comment
ENDgie 0 Posted November 26, 2020 I noticed the converter only gives 2 decimal places. Do we really know the game only saves 2 decimal places? Considering you can enter up to 4 decimal places (the same max as the MW config file will keep without read-only) and the fact this engine shares a lot with MW I wonder if the difference isn't the saved decimals but just lack of sensitivity value in an accessible config file. It feels to have an effect (for example 17.8451, my MW sens, feels different than 17.85) but that could be placebo, maybe some one with a consistent way of checking the same mouse movements could check if the inches/360 is slightly different between something like 1.0051 (the lowest to round up as the value doesn't round till above 5 not above or equal to 5) and 1.0100. Link to comment
stereo3D 41 Posted November 26, 2020 (edited) 1 hour ago, ENDgie said: I noticed the converter only gives 2 decimal places. Do we really know the game only saves 2 decimal places? On 11/14/2020 at 5:21 PM, DPI Wizard said: It doesn't do it in CW, it only registers the two decimals it shows. Edited November 26, 2020 by stereo3D Link to comment
SpunkyWhiteDog 12 Posted November 26, 2020 On 11/19/2020 at 5:51 AM, DPI Wizard said: Actually it is not impossible, I meant Legacy to Legacy re-using MW values in CW was impossible unless you have a specific FOV. If you use relative you can match it like this: https://www.mouse-sensitivity.com/?share=2bc860351597714a7ec7a6a0e796d470 What should we type in Sensitivity 2? Link to comment
Wizard DPI Wizard 3,891 Posted November 26, 2020 Wizard 55 minutes ago, SpunkyWhiteDog said: What should we type in Sensitivity 2? 0 SpunkyWhiteDog 1 Link to comment
Toastxr 0 Posted November 27, 2020 (edited) So I was doing some tests. I used the kovvaks sensitivity matcher to record these test. The current settings I use is 6 hipfire, 1.2 ADS for low zoom, 120 FOV affected and 1.78 coefficence (relative). I used the MP5 for this test. First I used an iron sight to try get my hipfire and ads to 1:1, I managed to achive this with 1.2 ADS Multiplier (Low Zoom). I then tested this with an AK-47 with iron sights and the sens is now not 1:1, is there a seperate ADS setting for AR's? I then did some more tests and found out that to achieve 1:1 with AK-47 iron sights i would need a 1.34 ADS Low Zoom sens. Meaning I would have to change my sens mid game if I decided to use AK-47. Edited November 27, 2020 by Toastxr Link to comment
fortunate reee 222 Posted November 27, 2020 2 hours ago, Toastxr said: So I was doing some tests. I used the kovvaks sensitivity matcher to record these test. The current settings I use is 6 hipfire, 1.2 ADS for low zoom, 120 FOV affected and 1.78 coefficence (relative). I used the MP5 for this test. First I used an iron sight to try get my hipfire and ads to 1:1, I managed to achive this with 1.2 ADS Multiplier (Low Zoom). I then tested this with an AK-47 with iron sights and the sens is now not 1:1, is there a seperate ADS setting for AR's? I then did some more tests and found out that to achieve 1:1 with AK-47 iron sights i would need a 1.34 ADS Low Zoom sens. Meaning I would have to change my sens mid game if I decided to use AK-47. go check this out, 1:1 is a relative term Link to comment
Toastxr 0 Posted November 27, 2020 So is it actually possible to do on cold war or would you just have to change your sens for certain scope and weapons etc? fortunate reee 1 Link to comment
Wizard DPI Wizard 3,891 Posted November 27, 2020 Wizard 30 minutes ago, Toastxr said: So is it actually possible to do on cold war or would you just have to change your sens for certain scope and weapons etc? Weapons have different FOV's hence different 360 distances. Typically you want to match your aims based on aim and not 360 distance. For ADS it can be beneficial to match 360 though, depending on the game. But for CW you will need a different setting for different guns. Link to comment
Toastxr 0 Posted November 27, 2020 Yea probs going to just change sens based of weapon FOV I don't mind it that much, just have to figure out what sens I will need for each weapon and scope. Link to comment
Wizard DPI Wizard 3,891 Posted November 27, 2020 Wizard 3 minutes ago, Toastxr said: Yea probs going to just change sens based of weapon FOV I don't mind it that much, just have to figure out what sens I will need for each weapon and scope. You can use the calculator for this: https://www.mouse-sensitivity.com/?share=e28354e0aac39d9ed90251cbf09a6e53 More scopes and ADS are coming. Link to comment
Wizard DPI Wizard 3,891 Posted November 27, 2020 Wizard Just now, Toastxr said: Thought you had to pay for it? Not 360 distance and individual aims. Link to comment
Toastxr 0 Posted November 27, 2020 Ah thanks, il have to go figure out how to use it. Link to comment
WhoCares? 21 Posted December 8, 2020 Could you add the 1.75x (holo-sight) and 2.0x zoom-levels? Link to comment
Wizard DPI Wizard 3,891 Posted December 8, 2020 Wizard 15 hours ago, WhoCares? said: Could you add the 1.75x (holo-sight) and 2.0x zoom-levels? Added along with a few other scopes! WhoCares? 1 Link to comment
KugelmagnetEddie 4 Posted December 17, 2020 So now the Cold War Guns are in Warzone... You have to use coefficient of 1.78 to match the ADS Senses of MW... now you have the MW and the CW Guns in one Game... Theres no way to bring these in line, is there? Its literally a game with two different calculations of ADS, but only one coefficient for both breeds. Am i missing something? Or is it incompetence at max level to implement guns like this!? No i am finally hitting shots in Cold War, i can not play Warzone anymore? How can they mess up like this Link to comment
fortunate reee 222 Posted December 17, 2020 (edited) 1 hour ago, KugelmagnetEddie said: So now the Cold War Guns are in Warzone... You have to use coefficient of 1.78 to match the ADS Senses of MW... now you have the MW and the CW Guns in one Game... Theres no way to bring these in line, is there? Its literally a game with two different calculations of ADS, but only one coefficient for both breeds. Am i missing something? Or is it incompetence at max level to implement guns like this!? No i am finally hitting shots in Cold War, i can not play Warzone anymore? How can they mess up like this complete non issue when configured correctly no need to use 178 Edited December 17, 2020 by fortunate reee Link to comment
Wizard DPI Wizard 3,891 Posted December 17, 2020 Wizard 1 minute ago, fortunate reee said: complete non issue when configured correctly no need to use 178 This, unless you are using legacy in MW you can use the exact same settings in CW. Link to comment
KugelmagnetEddie 4 Posted December 18, 2020 7 hours ago, DPI Wizard said: This, unless you are using legacy in MW you can use the exact same settings in CW. No i am using Relative. And it did never feel the same with 1.33 coefficient using the same settings from MW in CW. I use ADS Speed of 0.8 in MW. If i use that in CW with 1.33 it feels completely off. Unless they patched something, but why do sights feel so different in WZ then between the guns of MW and CW? Link to comment
KugelmagnetEddie 4 Posted December 18, 2020 7 hours ago, fortunate reee said: complete non issue when configured correctly no need to use 178 What does configured correctly mean? If i use the same settings in CW its not the same aim. I have Relative, 1.33 in MW with 0.8 ADS Sens. On FOV 103 - I use that in CW the scopes feel off. Even when switching between CW and MW Weapons in Warzone. I dont understand how that is even possible, its literally the same game there, in any other game you set the coeffiecent for all weapons the same. What else is there to configure, without changing my MW sensitivity settings? Link to comment
Wizard DPI Wizard 3,891 Posted December 18, 2020 Wizard 15 hours ago, KugelmagnetEddie said: No i am using Relative. And it did never feel the same with 1.33 coefficient using the same settings from MW in CW. I use ADS Speed of 0.8 in MW. If i use that in CW with 1.33 it feels completely off. Unless they patched something, but why do sights feel so different in WZ then between the guns of MW and CW? Unless you are encountering a bug in the sensitivity, using the same settings (coefficient and ads speed) when you use relative is exactly the same between the games. This is tested and verified extensively. The math perfectly matches the reality, the settings do exactly what they intend to do. But note that, as mentioned, aims with the same power are not the same (in terms of FOV) between the games. Their relative sensitivity is still correct though, but their 360 distance will be different. Link to comment
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now