ProuDBeasT

https://www.mouse-sensitivity.com/?share=d5477b666b9d2b08703b975e957f87af Don't forget to adjust the "scale" option according to your ADS multiplier value in Valorant.

That's right, but I think that using the mean could be the play or not depending on the amount of discrepancy and the discrepancy tolerance of each individual. In this case, assuming the same HFOV, the mean scalar_0 value would give a 13% increase in MDH for the 1x group (MDH 88%) and an 8% decrease for the second group (MDH 67%). A >13% difference in MDH might be tolerable. For me, personally, a 25% change in MDH is too big of a difference. MDH 100% for the 1x group gives a scalar_0 value equal to MDH 75% for the second group. That's so noticeable for me that I just try to avoid using those iron sights (very annoying in the early game). Now, if I used the mean scalar_0 value, it'd be the same as using MDH ~125% for the first group and MDH ~86% for the second one. That's up to a 25% difference again.

The conversion method that you're using in CoD is MDH 75%. It'd be set up like this: https://www.mouse-sensitivity.com/?share=4f80cd5879d4a98cae9dd6d6408064fd I'd suggest you to use the same FOV values for both games and also using the first "scalar_0" value in Apex (not the second one).

I had the same issue and decided to switch to MDH 100% about a year ago and I'm doing just fine, I just had to get used to it because it felt too fast at first (aim training using ADS FOV and sens in some scenarios might have helped). Upsides: I can switch seamlessly between all the games where I can set MDH 100% (which are almost all these days). Downsides: getting used to MDH 100% might be a bit annoying for the first few days. Switching to MDH 100% was also how I was convinced that aim is all about hand-eye coordination and one of the consequences of that is that you can get used to basically any hipfire to ADS conversion.

Hi! I've posted a bug report on the EA forums so that the devs can see that there are some issues with the 1X ADS sensitivity slider: https://answers.ea.com/t5/Bug-Reports/The-1x-ADS-sensitivity-slider-is-shared-between-3-different-zoom/td-p/10452790 If this gets enough attention, Respawn might fix it, as they've done in the latest patch, where they included the option to disable the FOV changes when using abilities such as Octane's stim or Bloodhound's ult. That FOV issue was also posted on the EA forums, it had lots of support and it was even upvoted by two EA CMs. This bug report about the 1X slider has also been upvoted by one of them already, so it could get somewhere. Upvoting and commenting to bring this issue to the front pages on the EA forums would help a lot, so thank you to anyone who does it.

I'd say that sticking to MDH 0% is a good solution. You're already used to it, so the main factor that decides right now if you hit your flicks or not is your mouse coordination. Getting used to a higher MDH % won't change your coordination by itself, so the % of flicks that you hit after adapting will probably be the same.

People usually go for MDH 100% or 75% for flicks (maybe 56.25%), but you can try literally any other MDH %. Higher percentages feel faster and that's why they might feel better for flicking. That being said, changing your MDH % could feel better at first, but being able to flick (or to aim in general) just depends on your coordination, so when you get used to the new %, you'll probably do as good as you did with MDH 0% or maybe a bit better if your coordination got better when you were adapting. It's just up to you if you want to go through that adaptation phase or not.

You do have to input all those values. You don't need to type them, though. You can just Ctrl+C each line without the sens value, Ctrl+F it in the config file, Ctr+C the sens value from the calculator and replace it for that line in the config file. All these lines usually appear one after the other in the config file (especially the ADS sens lines), so if that's the case, you could just Ctrl+F the first one, select all of them and replace them with a copy of all the calculator inputs at the same time.

You can use that link to convert your Planetside 2 sensitivity to any game (including Fortnite). The calculator settings in it make sure that you always get the closest result possible. You might want to add those settings to your saved inputs with the "Convert to" part cleared (https://www.mouse-sensitivity.com/?share=7250a4e39257da328d25a9e9717f21fa) and set it as default, so that you don't have to use a specific link every time that you want to convert your sens to another game.

Yes, the same as the game that you are converting from.

That's why I'd give MDH 0% a try, you're already used to it, your sens will probably feel the same in Valorant. I've tried going from 100 HFOV to 120 HFOV in Kovaak's (using an MDH conversion, not 360º distance) and then going back in the same session and my aim feels the same in both cases (and scores also stay the same); navigation definitely feels different, though. Anyways, it's just another possibility

The FOV difference is huge: the Valorant FOV would be similar to the FOV of a 2X sight in BFV. I'd actually suggest you to convert your hipfire sensitivity using MDH 0% instead of 360º distance and give it a try. It'd literally be like ADS-ing all the time in BFV, but that's not necessarily a bad thing, since you basically aim with your hipfire sens in Valorant and maintaining the BFV navigation speed (same hipfire 360º distance) is not as important as maintaining your BFV aim (MDH 0%).

If by 1:1 you mean that your hipfire sensitivity feels the same across all zoom levels, objectively, the best method for that is MDH/MDV 0%. This link will give you the config file settings for MDH 0% when you select a DPI value: https://www.mouse-sensitivity.com/?share=2171c902dd0bc154d1e834e80e8f4c8e These are the key calculator settings:

Since your hipfire FOV in Apex is greater than the hipfire FOV in Valorant and you are used to MDH 0% (1.0 ADS multiplier in Apex), matching your hipfire sensitivities using MDH 0% will give you that ADS "feel" (Valorant hipfire would be like a sight with 103 HFOV in Apex): https://www.mouse-sensitivity.com/?share=45f894cabeadf1a65388d6633f45637e

What usually works best for that is MDH 100%. If it feels too fast, you can also try MDH 0% and see which one of those two you like the most. For converting distance, make sure to select this option: