Search the Community

I want to keep the same flicking speed as in valorant. my dpi is 820 and my ingame sens is .47 my game is in windowed mode so i guess the fov should be higher than 103. it tells me that my fortnite sens would be 5.3 but even the normal 360 distance feels a bit too slow to match valorant. how can i propery convert it?

I play Apex and was wondering how to use the calculator here to get 1:1 ads/hipfire or whatever the most optimal values are if someone could be so kind to enlighten me. I currently use a 2.469091 hipfire sensitivity and 1.7143 FOV (in config settings) Help is greatly appreciated

I hope im in the right place... i need help with calculating my ads/scoped sense so my hipfire sense is similiar to the different ads/scope senses. the calculator for me is really difficult to use and i really dont understand anything.. maybe someone who has more experience could do it for me quickly? and after you did it maybe sharing a screenshot so i can do it myself the next time. here are the information about the game. Apex Legends base sense is 0.477 (but the game is rounding it to 4.8) and 1600 dpi 1920x1080 monitor, native resolution FOV is 110 (max) if you need more informations just comment and im gonna respond. i appreciate all help, thanks in advance!

1.7 cl_fovScale is not working for me anymore and it now just says "Verify FOV." A few months ago it was working just fine for me. Is there anything I'm doing wrong?

Hello all, I am currently having issued converting my sensitivity from Apex Legends to Hunt Showdown, when entering all the info, I get wrong results, or "calculated sensitivity too low" as you can see on the screenshot. After messing around with the ADS, hipfire, etc.. I finally got some decent results but they still felt off, so I tried to measure my 360 distance for both games, hipfire and ADS. For Apex (16:10) I got : - Hipfire : 35 centimeters - ADS : 44 centimeters For Hunt : Showdown (16:9), I got : - Hipfire : 39 centimeters - ADS : 80 centimeters Those numbers are approximate and can vary from a few centimeters, however the huge gap between Apex's ADS and Hunt : Showdown is just too big. Isn't the 360° distance supposed to be the same across all ratios ? I would really really appreciate some assistance, I have been playing with the same sens since about 5 years and really would like to keep on going,, am I doing something wrong? Thank you very much in advance ! @DPI Wizard

Hi guy's im trying to convert my Widowmaker sens to my 2x scope in Apex and i dont know how can some one help me?

So.. i just changed my FOV to the max of 110 and came here to calculate my new sens. Soo, i came across the following incident: When i choose Hdeg 16:9 and type in my FOV of 110 i get my sens. (P1) Just to dobble-check i translated that 110 FOV to a Multiplier of 1.341899. Buuut...Ingame 110 FOV! MY Confiq says a multiplier of 1,55. So basically, now i have two multiplier, which are supposed to be same, but are not. So some thing here is screwed up..

Hello, ive been trying to get 1:1 apex ADS sensitivity with my hipfire sensitivity. My DPI is 400, FOV 110, and hipfire sensitivity is 1.4. Can anyone help me?

Hey guys, I have difficulties finding the right sens for the zoom levels in Apex Legends (calculating from Modern Warfare). All of them have the same value (see screenshot). What am I doing wrong? Or do you guys know a better way to find out the correct values for each scope. I searched a lot of threads aready but couldn't find anything useful.. Relative aim coefficient: 1.25 Would be awesome if you could help out, because I really want to get back to Apex.

Hello . i am having a hard time to set my aim for apex. Sensitivity is 2.7 in game Dpi 513 Hip fire :360 = 30.007 cm i want to have the 30cm 360° for all of the ads and scopes. Not quite sure how the whole thing here work plz help ! Ty

First of all, I am french so I just want to say than my english is not perfect. I would like to have so help. I tried for 10 hours straight to covert my apex sensitivity to r6s. So if someone could help that can be very cool. So this is my sens. 2.5 In game with 1.0 scope for 400dpi. thanks you btw I'm way to poor to buy a membership. I still play on a potato pc and i saving for a mouse

So, I've been reading a lot of posts (Skidushe's post twice) watching videos and other posts in the forum trying to learn and understand all this sensitivity calculations. I now understand better but still not quite sure if I'm getting the best results. I also chatted a little with Drimzi on Kovaaks discord but don't want to be bothering him that much you know. Would guys give me some advice? I play a variety of FPS (PUBG, Apex, OW, R6, Splitgate, Black Squad, etc) My goal is to be sure I'm "exporting" my Kovaaks training gains into other games, say Apex. In Kovaaks I'm using Overwatch as base game, 103 FOV and 9 sens with 400 dpi ( Full HD 24.5 in monitor, windows default 6/11). I'm getting a lot better and following Aimer7's guide also feedback from discord fam as well. Before knowing all this conversion techniques I used cm/360 measurement (38.4 cm) to set my sens between shooter games. Trying to match my ADS cm/360 in APEX to my Kovaaks/OW cm/360. How naive I was not even considering FOV's, scales, etc. Something was wrong with that method, sens was not feeling good so I started digging and here I am. After reading Skidushes post I tried Horizontal Monitor Distance 0% method first. The results I got was 3.23 hipfire and 1.0 for all the scopes. In game, the hipfire was faster but felt accurate in terms of monitor distance, got no problem to adapt to this speed. The scopes are all very slow and I have a hard time tracking my targets, since apex is quite heavy on tracking this is not working for me. Per Drimzi's advice I used Visuomotor method on his calculator but got the very same results I got from MMH0%. MMV0% give me virtually the same results as well. So after doing some more research, found some people saying Viewspeed was the best method for gamers who use low sens as me, because MMH0% is good for the accuracy very close to de crosshair but hard on large flicks and tracking, make sens to me. Tried Viewspeed Vertical method for all conversion setups and got these results: This felt way better in both hipfire and scopes, I was able to track a lot better with the scopes zoomed in. As I'm writing this post this are the settings used in game, problem is, now I feel they are a bit faster and my idea is to tweak them down a little to find a sweetspot and try them like this in other games to see how I do in reality. My only concern now is if I'm doing things right or on the contrary, messing all up and screwing everything up. Would it be better to try hipfire 360° conversion and viewspeed the scopes? Should I stick to the MMV0% and get used to that slowish feeling? Should I convert my OW sens to APEX ADS in the calculator instead MMV0%? I know I'm overthinking too much and maybe is irrelevant, but some guidance would be very appreciate it. Remember My goal is to be sure I'm "exporting" my Kovaaks training gains into other games. Thank you in advance Just to update this issue: I stick to MMV0% although it feels slowish when using high zoom scopes its only a matter of getting used to it. Being sticking to this method and I do feel consistency across games (Apex, PUBG, OW, R6, Destiny 2, Splitgate) Important to mention that I'm trying to set very similar FOV's among the games to keep the consistency as well. Base game is OW FOV 103 400 dpi 9 in game sens

Can someone help me covert my Rainbow six sens to APEX legends Pleeeeeease? My R6 settings are 20 vert & horizontal , 26 ads, 800 dpi, 24 inch monitor (Default Multipliers) Thanks in advance

Apex, apex legends, csgo, sensitivity, convert, help

So let me start with my settings currently I use 24.7cm (7 OW, 2.1 Apex and 800 DPI) in Overwatch and Apex Legends, these can easily be converted since the FoV doesn't differ that much. 103 FoV overwatch and 90 Apex, so my question is how does one create a somewhat similar sens in Fortnite. From what I know is that resolution affects vertical FoV and stretched messes with how fast the enemies appear and the x sens is faster based on how stretched it is. So what is exactly the best thing to do from this PoV? I have played stretched before and I really like it, but I like my settings to be somewhat alike in every game for more comfort. Obviously non of this would be a problem if I could just play Fortnite on 90 FoV. I'm wondering if stretched can give me a similar focal length (atleast vertically) so I can use a somewhat similar sens. But I think instead of stretched I would have to adjust the sens to match similar focal vertical focal length with black bars, giving up on screen size. In my situation would it not just be best to use 0% monitor match and just play stretched as I prefer? 1600x1080 is what I personal like using in Fortnite. But I use Overwatch settings on native, when practicing my aim on Kovaak's. According to Aimer7 (he is very good aimer and also wrote a Kovaak guide), he says muscle memory doesn't matter as we can very quickly adapt to sens, and conversion is not really neccesary, just going by preference is fine. I however think the conversion can be very useful to create the same sense of aim when switching from game to game. Also I know it's gonna feel/be different regardless, games will use different camera distances, engines and max - min FoV's, but having it close to eachother is very helpful. Like imagine playing 24.7cm on one game and 50cm on another game, constantly having to re-adjust is not really practical right? Would love to hear you guys' feedback! On a side note I have already converted Overwatch / Apex to Fortnite with both 360 distance and 0% monitor match and I'm indecisive which one I like more, but I currently am using 0% monitor match which is about 32cm on Fortnite as opposed to 25cm on OW/Apex.

So recently in apex legends my sens lowers when my fps drops can someone help me please?

Hi I'm an fps user with overwatch, apex legends, r6, pubg. I want to adjust the apex legens sensitivity to overwatch, r6, pubg But I'm trying to get all the same sensitivity, but it's not easy. I do not know how to set Conversion setup, fov type on the calculator. And when we do overwatch, we often do solder76, and when we adjust the sensitivity, we have to confuse whether we should do with hipfire or ads. The fov value is written like this apex legend fov: 104 r6 fov: 90 overwatch fov: 103 pubg fov: TPP (FPP: 103)

Hello, I'm looking for help to find my ADS sensitivity of R6 for Apex and I can not seem to find it. I do not understand all the options available to me, i just managed to find my sensitivity HipFire... Can you help me? Config R6S: ADS : 53 Multiplier : 0.02 DPI : 800 Monitor : 27 Reso: 1920*1080 FOV : 90 I am a beginner on the site Thank you

I'm a bit stuck on converting my BF V sens to apex. My BF V Settings: CONTROLS: BASIC: soldier mouse aim Sensitivity 20 (default) solder zoom aim sensitivity 100% ADVANCED TAB: Stick aiming left/right acceleration 0% (yes it says stick but a clanmate said that it affects mouse aim too and ofc u dont want any left/right acceleration) Uniform soldier aiming ON USA Coefficient 100% (I think that makes the sensitivity the same at all zoom levels) 1x -10x zoom sensitivity all on 100% soldier aim ratio 100% (basically means the left/right sens is the same as up/down sens which isn't default!) VIDEO: FULLSCREEN 1920x1080 60hz FOV 90(when u hover over it it says horizontal FOV 106) ADS FOV ON I'm not sure how and where to enter that into the calculator, any help appreciated! Just tell me if you need more informations. Thanks in advance!

I was wondering if someone could help me with converting my sens from Apex Legends to rainbow six. I've been trying to convert the sens from one game to the other one, but for some reason I can't do it. My hipfire sens in Apex is 3.0 and my ads is 1.0, I use 104 FOV and a 27 inch monitor, and 400 dpi. I would really appreciate if someone could show me how to do it.