PUBG: BATTLEGROUNDS (PlayerUnknown's Battlegrounds)

[mrazzle11]

Just to verify. When matching from BF1 to this game. Do I match my hip fire from BF1 using 360 method and then use viewspeed on the battleground hipfire to do my scoping and 4x? Or do you match the 1.25x and 4x using viewspeed from BF1 to come up with the Battlegrounds scoping and 4x?

[KandiVan]

Alright so personal opinion here, but heres what im running. Match cm/360 for hipfire/targeting/scoping (as the FOV difference for these three are relatively small). Match viewspeed for 4x/8x/15x as the FOV difference is much larger. On a theorizing note, I'm starting to think that it might be better to match cm/360 for any VFOV differences less than or equal to 10 degrees VFOV (very soft threshold, could be higher), I feel like the muscle memory from the actual cm/360 in game has more merit for flicks than we're giving it. When i get the free time, I'm going to try and do more statistical testing of this on quake live and will let you guys know.

Edited April 6, 2017 by KandiVan

[zacktomgg]

 

PlayerUnknown's Battlegrounds (Config File):

- For Dayz 0.2 @ 800 DPI

 

• Hipfire (360°): 0.012746
• Targeting (360°): 0.012746
• Scoping (Viewspeed): 0.010899
• Scope 4X (Viewspeed): 0.010295
• Scope 8X (Viewspeed): 0.010266
• Scope 15X (Viewspeed): 0.010289

 

 

hey can you tell me what 2 sens on 400 dpi is? like you did here thanks 

[mrazzle11]

Hey DPI Wizard you might want to try disabling mouse smoothing option if it has any difference

 

 

Does this mess up the calculations? It seems like it speeds things up to me. Can anyone confirm?

[katte]

Does this mess up the calculations? It seems like it speeds things up to me. Can anyone confirm?

Yeah the smoothing is enabled on default so I think the calculations are made with smoothing on. Need DPI Wizard to take a look at it.

[DPI Wizard]

The FOV fix is great, just added support for it. It is explained in the FOV notes in the game info. Basically if you use it, change the FOV to 112 in the calculator (it will reset every time you change aim, fixing this is on the todo list). The correct FOV is probably 80 vdeg, but I'll leave it as it is until there is a FOV option in the game.

 

Mouse smoothing also makes the the aim feel a lot better, but the sensitivity is the same so no change needed.

[Flips]

guys .. please check my screenshot .... i cant find the file :/ .. there is just a .pak file with the name

 

http://prntscr.com/etr3mm

[DPI Wizard]

guys .. please check my screenshot .... i cant find the file :/ .. there is just a .pak file with the name

 

http://prntscr.com/etr3mm

Wrong location, correct location is:

%LOCALAPPDATA%\TslGame\Saved\Config\WindowsNoEditor

Copy and paste this entire address into your address bar

[Flips]

okay, i found it lul .. is this value the right value ? http://prntscr.com/etrb0z

 

LastConvertedMouseSensitivity=0.008910

[Flips]

when i check it in game game the fader is already 35% not 31% ^^

[DPI Wizard]

okay, i found it lul .. is this value the right value ? http://prntscr.com/etrb0z

 

LastConvertedMouseSensitivity=0.008910

No, pay attention to the MouseSensitivityName= value. The output in the calculator will tell you what to look for. And the in-game sensitivity value will not be updated.

[Eliaxie]

I am using a sensitivity of 15% and 0,02 multiplier on Rainbow six Siege  and I can't figure out what my LastConvertedMouseSensitivity should be. The problem is that when I change the sensitivity in gameusersettings and I load the game the LastConvertedMouseSensitivity became another number...

[mrazzle11]

I was having the reset issue earlier. Make sure you replace the entire line of code as stated earlier in this thread. Also, make your .engine file and gameuser file "read only."

[ccmike9]

Hey Dpi Wizard, any update on matching the viewspeed to the third person FOV?

[Jakalslis]

Info: Since last patch (14.04.) Fov fix (AspectRatioAxisConstraint=AspectRatio_MaintainYFOV) doesn´t work anymore. Fov Slider was announced to be implemented soon.

[Creizai]

2x scope added to the game 

[DPI Wizard]

2x scope added to the game 

Will add it soon.

[Creizai]

Will add it soon.

Haha I just added the scoped and 4x scoped divided them by 2 and hoped for the best.  My hold over from the 4billion dpi it felt like before

[happysouls]

what's the default fov right now and how do you find out what it is?

[get951753]

Please Update Scope2x

MouseSensitiveName="Scope2X",MouseSensitivity=39.406780,LastConvertedMouseSensitivity=0.012269

Thanks

[DPI Wizard]

2X scope added!

[Jakalslis]

Did the fov change ? Cause my Numbers changed a little from Desktop 400 dpi WPS6 using viewspeed.

[DPI Wizard]

Did the fov change ? Cause my Numbers changed a little from Desktop 400 dpi WPS6 using viewspeed.

I changed the default FOV from 75.6 to 76 in the calculator, so calculations will be slightly different. It will probably change again when they implement the possibility to change FOV in the game.

[OrangeGuac]

I'm guessing this may be a simple answer but I'm not getting it. I understand hip fire and 2x-15x but what do targeting and scoping represent in the calculator (is one of these for iron sights)?

 

Thanks for any help.

[DPI Wizard]

I'm guessing this may be a simple answer but I'm not getting it. I understand hip fire and 2x-15x but what do targeting and scoping represent in the calculator (is one of these for iron sights)?

 

Thanks for any help.

Targeting is when you hold right mouse button the view is locked over either left or right shoulder in 3rd person, while Scoping is when you click right mouse button and aim down sights (ADS) either without a scope, or with holo or red dot attachment. Weapons differ slightly here, but assault rifles are used for calculations.