Search the Community

Hello, maybe im just to dumb to set the calc up. But how do I make my 1x 1:1 to mys 2.5x in r6. Setting are: 800 dpi 16:9 (4:3 aspect ratio) 87 fov 7/7 1x 35 2.5x 45(rn want that to be 1:1) Thanks in advance

I want my hipfire to be as close as my ads sens but it seems like I can only convert to the ads of a 1.0x scope. It repeats the same ads for each scope, which is unlikely because less fov=higher sens to compensate. Am I missing something in the conversions or is it a bug? Thanks!

Hello I currently own a Logitech g303 shroud edition. I'm having issues where my mouse sens feels way to fast on every mouse I've owned. One minute I can aim just fine then the next day I can't at all. It's like some hidden mouse acceleration like ice. Like I said before some days I could aim just fine and the cursor feels very controllable. Any help on this?

Hi, I purchased a subscription hoping I could get some support calculting CSGO to Modern Warfare 2 / Warzone 2.0 When scoped in with a sniper rifle I want the sensitivity to be exactly like the first and second zooms of an awp, first below or equal to a 8.0x zoom, second greater than or equal to this. I am dissapointed that the calculator suggests I cut the zoom sensitivity. Doing manual testing with a ruler the right value should be somewhere between 1 and 1.5 zoom multiplier using a monitor distance coefficient of 1.33. I am using a DPI of 800 a 16:9 screen, a zoom_sensitivity_multiplier of 1 in CSGO and a sensitivity of 1 in CSGO. Similarly my hipfire (nomal) sensitivity in Warzone is 3.33. Can I kindly ask for some support in this as the zoom sensitivity values for Modern Warfare are blatently wrong. I have found it very difficult to find the right information to assist with this issue. The results of the output are below, I don't know why the calculator chooses to use the 0.82 zoom_sensitivity_ratio_mouse when I want it to use the default value of 1.

Hey guys, I was converting my sens from Overwatch 2 to BattleBit Remastered and I was wondering if I should use the hipfire 360 matching or the vertical/horizontal matching The results of the converstions are vastly different, which one is the better one to keep the same "feel/muscle memory? And why are ADS and Scope always matched by Vertical? why does the hipfire come as default on 360 distance? shouldn't vertical be the best for everything?

i havent been able to see my notification inbox for the last few days or so is this a know issues or do you know of any ways to resolve this

Hello there , I'm kind embarassed to ask this cause everyone gonna juged this cause my settings is just completly wierd , So i'm already sorry for my bad English but i gonna try to make this the most clear possible here is my issue: i'm playing with 100 dpi with a logitech and 11/11 on windows sens and i'm playing warzone (CoD) with a sens of 77.74 (it's really high but it's what am i confortable with) the thing is i'm literally stuck to convert it in a another game because the sensitivity scale is too low for my high sens warzone like if i want to play apex it's 23.322 sens of convertion of 77.74 in warzone but the scale sensitivity in apex is ending 20 maximum... great to dev making max scale in all game for no reason. So i know what did you gonna say change your dpi ... I have already to convert my dpi to 350 of windows with 6/11 because the multiplicator is 1X , and 11 the multiplicator is 3,50X. Both is doing (350) if i put 100 dpi on 11 (100 x 3,50 = 350) and on 6/11 is (350 x1= 350 as well )... The thing is the sens in converton to 350 dpi and sens ( 77.74x100 / 350 = 22.21) so the 22.21 sens with 350 dpi in game is absolutelly not the same felling at all. And every godamn game now don't have a Raw input option for using windows sens aswell for again no reason valable... Example black ops 1 use in the background windows sens so i use 10.3077 sens , and it's exactly the same scale sensitvity of Apex legend but here there is raw input off.... if someone have a idea for my issue like a application doing your own sensitvity in anygame or something else i will really appreciate ...

I'm trying to find the config file for Hell let loose so I can manually change the sensitivity to match my other games. I'm having a lot of trouble finding it.

Hello. I am attempting to convert my Apex Legends ADS sensitivity to my rainbow six siege ADS sensitivity. Apex is one of the few games where I feel like my sensitivity is just right, and I've been struggling quite a bit in rainbow six siege ads . I've even purchased a monthly subscription out of desperation for access to other options in the calculator, but I'm still struggling to work the calculator :(. My FOV in Apex Legends is cl_fovscale = 1.7. my hipfire is 0.8 and my ads multiplier is 1, 1600 dpi. I'm trying to convert my sens for all ads scopes in apex to them in rainbow, so 2x to 2x and 3x to 3x, etc. But it always comes up with the same number no matter what I try. It may be a 1 to 1 on one scope but the others aren't even close. If there's any additional info you need, please let me know, as I have tried just about everything I could think of and could really use some help. Thank you in advance

Hello all, i have been trying to use this calculator to convert my in game sens from bfv to hunt showdown. here are my in game settings that i think are relevant fov 79 ver ( which is shown as 95 hor) rez 1920x1080 16:9 ads fov is on unified soldier aiming on aim sens = 1% coeff=178 dpi=3200 i plan on playing 110 fov in hunt with hunter mode turned on how should i go about using the calculator , what mode would be better i mostly want my on screen sens to feel the same and if i can i would like to keep the 110 fov in hunt how do i go about inputing the sens , do i add it as 0.01? where do i enter my 178 unified aiming coefficient? any help would be greatly appreciated.

Hello everyone! I would greatly appreciate if anyone could help me transfer my Planetside 2 sensitivity to Apex legends. My DPI is at 800 and my in game sensitivity for Planetside 2 is 0.180 for both hipfire and ads (I play at default settings) I play at max vertical fov of 74 and I use a 1920x1080p 24 inch monitor. Thank you so much in advance to anyone that can mange to help me, i'm still trying to get used to how this all works so if you need any extra information from me please let me know. Thank you again! Also, I don't mind talking to anyone over discord if that makes things easier, plus we can get to know each other and maybe game together. Thank you!

I'm trying to get my sens from squad to dayz and my results come to 0.41, but in game theres just a bar, no numbers or anything, just a bar that goes left to right. what do i do to implement the calculated sens?

Basically, I filled in all the points for converting my sens and its not working. I've tried the kovaaks matcher and others and nothing has worked. Please if there is anything ive done wrong inform me on what it is/what I need to do.

Sorry if there is an issue with this type of post, but I am really unexperienced with converting sensitivities, so I require a little assistance. I've used the calculator countless times and never found a consistent feeling sensitivity with any other calculator, but never been able to get an actual answer with this calc itself. If anyone would be able to help here are my rainbow six settings: Monitor: 21.5 inch Aspect ratio: 5:4 (streched) FOV:88 1920x1080 Hipfire sens: 92/92 (H/V) (ingame) ->Hipfire Multiplier: 0.002 (config) ADS Multiplier: 0.02 (config) X Factor aiming: 0.02 (config) ADS SENS (1.0x): 58 (ingame) ((RELEASE)) wps default, DPI: 400 if anyone is willing to convert the hipfire and 1x sensitivities that would be great, thank you very much!

not sure how to use the converter, i put hipfire first to see what my general sensitivity should be on hell let loose but when i try to find my sensitivity for ads "4x" the sensitivity is higher than the general sens even tho my ads sens is not higher in squad its higher in hell let loose after using the converter

Good day, I have recently set up an account and so i'm very new to this calculator. I've been trying to wrap my head around this for a couple days and can't figure it out. I'm trying to match the sensitivities from Siege before Shadow legacy, to Warzone for easier muscle memory. On siege my settings: Vertical and horizontal sens: 5 Multiplier: 0.02 DPI: 800 Old ADS: 50 New ADS: 1x scopes 35.13 ACOG: 61.34 FOV: 90 4:3 I've figured out that my hipfire on Warzone is 4.34059. This matches up perfectly. The problem is that I would like the sensitivity from my 1x scopes in siege to be the same as the 1x scopes in Warzone, and the ACOG in siege to have the same sensitivity as the VLK 3.0 in Warzone. Bonus points if i can make my sniper scopes in Warzone to also have the ACOG sensitivity. If you can, can you also explain if relative ADS sensitivity changes the values and if affected and independent ADS field of view changes them as well? I'm not sure which of them I should have on.

VALORANT - 2.50X - Operator, Marshal Location: In-game Settings -> General -> Mouse Sensitivity 1 Minimum: Sensitivity: Aim 0.01 Default: Sensitivity: Aim 1 Maximum: Sensitivity: Aim 10 Multiplier 1 Minimum: Scoped Sensitivity Multiplier 0.01 (2.50X - Operator, Marshal) Default: Scoped Sensitivity Multiplier 1 (2.50X - Operator, Marshal) Maximum: Scoped Sensitivity Multiplier 10 (2.50X - Operator, Marshal) Notes: All weapons use the same sensitivity setting, choose the scope sensitivity for the weapon you prefer.Select "16:9 Black bars" as aspect ratio if you're playing with "Aspect Ratio Method" set to Letterbox or are playing on a monitor wider than 16:9. Default FOV: Field of View 103 | Horizontal Degrees (16:9 Base) FOV Notes: FOV is locked and not possible to change. Affected by: FOV: WPS: Engine: Unreal Engine 4 Added: 2020-04-07 Updated: 2020-07-06 Counter-Strike: Global Offensive - Zoomed 1: AWP, SSG 08, G3SG1, SCAR-20 Config file: config.cfg Path: C:\Program Files (x86)\Steam\userdata\[USERID]\730\local\cfg\ Sensitivity 1 Minimum: sensitivity "0.01" Default: sensitivity "6" Maximum: sensitivity "30" Console: zoom_sensitivity_ratio_mouse Multiplier 1 Minimum: zoom_sensitivity_ratio_mouse "0.01" (Zoomed 1: AWP, SSG 08, G3SG1, SCAR-20) Default: zoom_sensitivity_ratio_mouse "1" (Zoomed 1: AWP, SSG 08, G3SG1, SCAR-20) Maximum: zoom_sensitivity_ratio_mouse "2" (Zoomed 1: AWP, SSG 08, G3SG1, SCAR-20) Notes: Disable acceleration by setting these options in the config file: m_customaccel "0" m_rawinput "1" Default FOV: fov_cs_debug 90 | Horizontal Degrees (4:3 Base) FOV Notes: FOV can only be changed if sv_cheats is enabled. Use the aim called "Hipfire (sv_cheats enabled for FOV change)" if you want to calculate sensitivity with changed FOV. Affected by: FOV: WPS: Engine: Source Added: 2016-05-17 Updated: 2016-07-04

Anyone know how to get my hip fire and ads to be 1:1 in apex or FPS games in general?

How do I go about changing my sensitivity in SCP: Secret Laboratory with Registry Editor? I can't seem to figure out how to work the registry. How do I find the file that I am looking to edit? What inputs should I use? Please help

Can anyone help me convert the sensitivity from Rainbow Six Siege to Apex Legends? I can't pay the membership because of currency issue. My sensitivity in R6 is: Horizontal - 11 Vertical - 11 ADS - 62 all multipliers are by default Fov - 87 Aspect Ratio - 16:10 Mouse DPI - 400 Thank you in advance!

im trying to get my sens right but when i put these numbers in r6 the movement is so so slow not even close how it feels in halo. any help would be great.

Hey everyone! I need your help. I recently got into osu and I'm trying to convert my sensitivity over from Overwatch. My monitor is 27 inches, my DPI I use for everything = 3200 and my sensitivity in game for OW is 3.60. Thanks in advance to anyone that sees this and responds! All the best to you.

I everybody, I just recently started using this and I was made aware that monitor distance is the best conversion method when dealing with different FOV's. This is great and all but I'm unsure as to how I use it in the actual converter. I change this conversion method and it gives me two percentages I have to put in, what would I put in the there?

i have been using this website for a while now and its really helpful, i have been using the sens calculator and fov, but today i may have relised that i have been using it wrong. I lauched Diabotical and my aim was really off, this was due to my fov being far greater and it confusing me on the actual distance of the target. With relising how important FOV actually is i decided to double check its correct on all games, now i use CSGO's 90 FOV, and i run 16:9 at 1920x1080 native. While converting FOV's i seen a drop down box called FOV type and i have been aware of this option for a long time, but i thought every game has a type it measures its FOV in, but i never understood why it was changable, i am now questioning if i have converted my FOV correctly due to the FOV type, i always leave it on the default and after changing it i am getting 2 different FOV values. So for example on apex Legends my fov is either 104 or 92 depending on my fov type. Thanks for any help provided

Games I play: Battlefront 2, Overwatch, R6, Fortnite and CSGO. So I try to convert my sens from CSGO to all the other games (CSGO sens is 3.2825 @ 400 dpi 31.6555cm/360° and scoped multiplier is 0.818933027098955175) and the Hipfire sens is perfectly the same but when it comes down to scoped sens it feels way slower in all games, I know it should feel the same since there are different engines but its not even the same when talking about 360°, I have done some tests moving my arm to one point of my mouse pad to another and the CSGO scoped gets further away than the other senses, what im I doing wrong? could someone help me out pls? If you need more details to help me I can provide them, what I do is basically is this: I just put my sens and it gives me these other senses, but if I start tweaking settings like the aim part it gives me other sens for rainbow six and it happens in all the other games, help me pls, if more details needed just ask and ill give it to you, thanks