Search the Community
Showing results for tags 'sens'.
Found 17 results
-
Hi everyone, I'm asking for help with a conversion as I don't know the mathematical method to do it. I play on Valorant with 0.396 and 0.9 ads. I would like to make ads my "raw aim" I know that the multiplier for the vandal is 1.25x but I play with 0.9 so what is the value that changes and what is the mathematical method to transform this sens? -
Hey, So I like to play on 3200 DPI but this is a pain in Tarkov because then you HAVE to use the config file every time you want to change sens and you turn to fast when holding middle mouse to look left and right. Well, I've found a way to get the numbers you need for the sensitivity within the in-game range while at high DPI and also lower the speed at which you turn while using the middle mouse function: simply open the config file shared.ini as you would to change your sens normally and then search for 'TurnY' and 'TurnX' and lower the first two 'sensitivity' values. (there are also a 'LookX' and 'LookY' but I didn't find any change from these, leave them be, it can be easy to get mixed up) Depending on what DPI you use depends on how much you will want to lower this. For me, as I use 3200 DPI and the value is '5.0' by default, I lowered this by a factor of 10. This makes sense for me as it also lowers my sensitivity by a factor of 10 (your sensitivity will be lowered by however much you lower this value) and my sensitivity for hipfire WAS 0.075 and for ADS 0.04, making it a much more reasonable 0.75 for hipfire and 0.4 for ADS now. Meaning if I change armor, I no longer have to quit the game, edit the config file and relaunch. I can just do it in-game. Note: whatever you adjust the default sensitivity of 5.0 by is how much you need to adjust the sensitivity you get by using the calculator by. For example, I divided my 5.0 value by 10, so I multiplied my sensitivity by 10. So if you divide the 5.0 by 2, making it 2.5, you multiply your sensitivity by 2 and so-on and so-forth.- 2 replies
-
- 2
-
-
- tarkov
- escape from tarkov
- (and 6 more)
-
help would be appreciated any links methods equations anything form anyone on the topic would help so much -
I don't understand how I can aim INSANELY well in BF4, I can easily pull 80-100k 20d in a 10-15 min hardcore deathmatch, but when i play in any other game like CSGO or Rainbow Six I can't reproduce the "same" results. Is it because the more fast paced deathmatch of BF4 with enemies being everwhere or is the playerbase in BF4 just inferior to the other two mentioned games. Or is it my sensitivies being different from each game? bf4 being 14% @ 450dpi with USA and FOV Scaling on r6 being 10 H 10 V 80 ADS CSGO being 2.4 I used to play 2.4 @ 400dpi in cs and had a HS% of 80 and above but once i switched it feels like the aim is more shaky and unstable but in BF4 it's spot on all the time. I don't get it, any ideas?
-
im trying to get my sens right but when i put these numbers in r6 the movement is so so slow not even close how it feels in halo. any help would be great.
-
Hello.I want to convert the sensitivity used by Kovaak into MW COD.Please check to see if my conversion method is correct.Kovaak/800 dpi/Fov100/1.25sensYou want to change to Cod sensitivity.Here are some questions.1. I think it is best to set COD Fov value to 115 that is the most similar. Is it right?2. Hipfire sensor is a 360cm or mdv problem If Fov were exactly the same, it would be the same.To make the most of my muscle memory,Is it best to use Mdv?3. For Cod, it seems to recommend sensor2 as 1.33. For Mdv or mdh, use 0% value, but is it also correct that mdv takes full advantage of my muscle memory?4. One of the COD options is when to convert ADS sensitivity. Is it better to set it to Immediate?5. Which option is best for REGACY OR RELATIVE?
-
Games I play: Battlefront 2, Overwatch, R6, Fortnite and CSGO. So I try to convert my sens from CSGO to all the other games (CSGO sens is 3.2825 @ 400 dpi 31.6555cm/360° and scoped multiplier is 0.818933027098955175) and the Hipfire sens is perfectly the same but when it comes down to scoped sens it feels way slower in all games, I know it should feel the same since there are different engines but its not even the same when talking about 360°, I have done some tests moving my arm to one point of my mouse pad to another and the CSGO scoped gets further away than the other senses, what im I doing wrong? could someone help me out pls? If you need more details to help me I can provide them, what I do is basically is this: I just put my sens and it gives me these other senses, but if I start tweaking settings like the aim part it gives me other sens for rainbow six and it happens in all the other games, help me pls, if more details needed just ask and ill give it to you, thanks
-
-
. -
I've tried 0% but I feel that it is tad bit slow so I tried out 56.25% but was told that people used that measurement when a vertical option didn't exist, instead use vertical monitor match 100%? What does vertical option mean exactly I'm a bit new so It's not to obvious to me. Distance vertical 100% = 56.25%. So do I just use 100% monitor distance vertical for every game? Also what do you think about view speed as I'm considering it as an option. Final thing (56.25%): One of the games that I play has a different fov multiplier for different guns (fov=64.375 for ak and 73.57142857142857 for revolver) as well as different sens. So what I did was convert my csgo sens to kovaaks at 1:1 fov measurement for kovaaks (that's how the fov of the game is measured apparently) and then used the program sensitivity matcher to match those different sens. Then I went ingame and sens matched again to get the values: Tesing 76% 2.2740 eg 1.72824 360/cm monitor matching 56.25% for ads { hipfire fov: 103 Rev- Rev sens based of kovaaks(fov=73.57142857142857):1.7242938 sens matcher: 0.0379345 (rough) sens ingame: 0.386218 Ak- Ak sens based on of kovaaks(fov=64.375): 1.5087572 sens matcher: 0.0331927 (rough) sens ingame: 0.386218 } as you can see the values are the same for both weapons, wouldn't these make it inaccurate? Also monitor distance vertical 100% would be the exact same so yeah I don't really understand could someone clarify this for me? Thanks
-
I've been doing a lot of testing for hipfire I feel that the sens differs in different games far to much. For instance if I used csgo (2.272500 hipfire for all games) to fornite with monitor matching 0% my sens would be 0.057 where as if I measured it with 360/cm it would come to 0.09, in another game it's the opposite (to high). So would it be better to use 360/cm for hipfire? Also for ads sens what is recommended and what are the differences between viewspeed monitor matching (0%, 56.25% and 100%) and why should I or should I not use them. I'm a bit new to all of this, forgive the noobness
-
In Siege, I use an alternate multiplier from what is default. I use 0.002230, rather than 0.02. I'm having a difficult time with the calculator specifically with games like CS and Apex. When I use the calculator to convert it doesn't feel in game like I'm doing things properly. In CS especially; the calculator suggests that I alter my CS FOV debug setting which it says isn't allowed without activating cheats I would also appreciate if someone could clarify this. Siege Settings: V/H : 84, ADS: 65, DPI: 400, Mult.: 0.002230, 24 in. Monitor. 1920 x 1080, 90 FOV, 4:3 aspect ratio. Please ask questions if necessary, thanks for the help in advance. -
Hi, I'm pretty new to this and I don't know what I need to use for the conversions. My DPI is 1000 and ingame sens is 4. Thanks! -
Can somebody help me? i play CSGO with 400 DPI and a Sensivity of 3.5 (4:3 1280x1024) Rawinput ON I also play osu, but i really can't play with the new mouse, and need the 1:1 converted settings of it. so could somebody help me out? ^^ Osu = 1920x1080 16:9 fullscreen. also Rawinput ON
-
Hey guys, I have 6 sensitivity in OW and 103 FOv, if i change my csgo sensitivity to 1.8 it is not accurate, raw input is ON. this is my viewmodel, if it matters: //Viewmodel viewmodel_fov 68 viewmodel_offset_x 2.5 viewmodel_offset_y 2 viewmodel_offset_z -2 cl_bobamt_lat 0.1 cl_bobamt_vert 0.1 cl_bob_lower_amt 5 cl_viewmodel_shift_left_amt 0.5 cl_viewmodel_shift_right_amt 0.25 Can u help me? ._. ty
-
Hello, could someone check for me sens from Overwatch to Rainbow Six Siege? I have 800DPI and 3.5 Sens in Overwatch and I want to check how much sens it would be in Rainbow. Btw is there option to check scope sens too? I have scope sens 40 in Overwatch. I just want to know that 1 or 2 sensitivities for Rainbow.
-
I'm currently using 4.25 and 800 DPI on Overwatch with a 103 fov. I would like to have the same sens in csgo, but I can't really figure out what I have to use exactly, I'm playing on 1280 x 960 4:3, my question would be what do I have to fill in exactly to get the same sens
